Hitech Pipes & Tubes is Leading Exporters of ISMT Ismt Mining Tube Tubing

Best Quality Steel Pipes !! Genuine Suppliers of Ismt Mining Tube Tubing, Look Up Quick Results Now!, Better Deal On Bulk Ismt Mining Tube Tubing., Supplier of Ismt Mining Tube Tubing India, Call us Now & Get Free Estimates!

Ismt Mining Tube Tubing Stockist UAE. Ismt Mining Tube Tubing Stockist Qatar, Ismt Mining Tube Tubing Stockist Kuwait, Ismt Mining Tube Tubing Stockist IRAN, Ismt Mining Tube Tubing Stockist Saudi Arab , Ismt Mining Tube Tubing Stockist Indonesia, Ismt Mining Tube Tubing Stockist Russia

Tubes : :: OCTG Products : High Collapse Casing :: Hydraulic Line Pipes :: Tubes for Mining :: Powergen Tubes : Multi-Rifled Tubes :: UHS™ Structural Tubes

 

Tubes for Mining
Tubes for the Mining Industry

At ISMT, the mining and drilling industry is a special focus area. We manufacture a very wide array of tubes catering to virtually every application in this industry. Typical end use of our tubes include:

• • Drill Rods
• • Drill Castings
• • Drill Steel (Hex as well as round OD)
• • DTH Hammer Casings & Pistons
• • Core Drill Barrels
• • Thin Walled Tubes (eg : TBW, TNW Outer and Inner)

Toughdrill™ tubes embody over 20 years of experience in the manufacture of application specific tubes for the mining and drilling industry. These tubes are manufactured to the highest industry standards and tested rigorously. As a result, we can virtually guarantee that our tubes will outperform and outlast any other tube in the industry.

We produce our steel through the electric arc furnace route. The raw material mix is chosen and prepared carefully to ensure the highest standards of cleanliness. All heats are ladle refined and vacuum degassed before continuous casting and rolling. Right through the production process, we maintain full traceability of the material and a record of the tightly controlled process parameters. This ultra-clean steel forms the starting point for the manufacture of our tubes.

The manufacture of precision seamless tubes is as much a matter of equipment as it is of experience and process technology. At ISMT, believe in investing in the finest of equipment. For making seamless tubes, we operate three Assel Mills, one PQF Mill, Pilger Mills and Cold Draw Benches. Our tube-mills are imported from Shloemann Mannesman in Germany and incorporate the best in technology. With regards to experience, our team is amongst the most technically qualified anywhere in the world – the tubes that we produce for the mining industry reflects this experience.

TOTAL PROCESS CONTROL

At ISMT, we believe the only way to guarantee quality is to stand responsible for the entire production process. For that reason, we produce all our steel in-house. We bring to bear over 20 years of experience in manufacturing high-grade Bearing steel to all our manufacturing processes and to all our steel products (we are among few select manufacturers globally to be approved by SKF & FAG for the supply of Bearing steels).

“BEST IN CLASS” TOLERANCES

ISMT offers the tightest tolerances in the industry. We are able to do so because of the proprietary processes that we have developed. For example, to ensure tight control over eccentricity (+/- 5%) we provide very high cross sectional reductions during cold-drawing process. Similarly, we use special surface treatment processes that we have developed to ensure good dimensional control and surface cleanliness after heat treatment. In the same vein, to ensure a good surface finish, all our cold-draw tooling is either made from special materials such as Tungsten Carbide or is TiN coated. For applications that demand a superior surface finish, we also offer Bright Annealed tubes.

1 IN 6000 STRAIGHTNESS

We understand the importance of tube straightness to the mining industry. Therefore, we subject each and every tube to a stringent 5 point TIR straightness check and correction procedure with special attention to tube end straightness. By doing so, we guarantee a straightness of 1 in 6000 or better.

LOW RESIDUAL HOOP STRESS

For Drill Rod tubes, we have developed a unique process that allows us to guarantee very low residual hoop stress of 65 MPa (max). Further information on this special product (used for very demanding drilling conditions) is available upon request.

 

Stockist and Dealers of ...

 

Dealers of steel pipes in Mumbai India | Dealers of steel pipes in Saudi Arabia | Dealers of steel pipes in Seamless Tubes, Casings, Hot Rolled tubes, Boiler Tubes, OCTG, Pressure Tubing, Heat Exchanger Tubes, Line Pipe, Tubing, API Couplings, Boiler Tubing, Seamless Pipe, Pressure Tubes, CV Cages, Drill Tubes, PQF, Heat Exchanger Tubing, Bearing Races, Pilgered, Cold-drawn, Alloy Steels, Hot finished tubes, Engineering Steel, Seamless Tubing, Alloy Steel, Premium Quality Finish, Carbon Steel, cold

 

finished tubes ,Bearing Steel, Pilger, threaded couplings,Cold Drawn, Automotive Components, Hydraulic Cylinders Tubes, Gas Cylinders tubes, Mining and Construction tubes, Bearings, Chrome-Molly, Boom Pipes, Pilling Tubes, Hollow Bars, Mechanical Tubes, Piston Pins, Tubes for Perf Guns, Rifled Tubes, Front Fork Tubes, Construction Tubes, HSRG Tubes, Indian Seamless and Metal Tubes, Alloy tubular products, Alloy tubes, Cold drawn tubing, Cold drawn seamless tubing, Cold drawn seamless tube/s, E355 tube, P110 Casing, Casing pipe, API Couplings, Process pipeline, Process pipes, High collapse casing, Sour service, Sour service pipe, Line pipes, Line pipe couplings, 13 chrome tubing, Indonesia Russia | Dealers of steel pipes in Chennai | Exporters of steel pipes in Mumbai India | Exporters of UHS™ Structural Tubes in Mumbai India | Dealers of MS and Hydraulic Line Pipes in Chennai | Dealers of MS and Hydraulic Line Pipes in Saudi Arabia | Dealers of MS and Hydraulic Line Pipes in Indonesia Russia | Dealers of MS and Hydraulic Line Pipes in Saudi Arabia | Dealers of UHS™ Structural Tubes in Chennai | Dealers of UHS™ Structural Tubes in Saudi Arabia | Dealers of UHS™ Structural Tubes in Indonesia Russia | Dealers of UHS™ Structural Tubes in Saudi Arabia | Exporters of ERW Boiler and Air Heater tubes in Mumbai India | Ismt Mining Tube Tubing | Ismt Mining Tube Tubing Tubes | Exporters of MS ERW and Hydraulic Line Pipes in Mumbai India | Ismt Mining Tube Tubing Pipe dealers in Chennai | Ismt Mining Tube Tubing Pipe dealers in Saudi Arabia | Ismt Mining Tube Tubing Pipe dealers in Indonesia Russia | MSL pipe dealers in Saudi Arabia | Exporters of ERW Boiler and Air Heater Tubes | Exporters of Steel Pipes | Exporters of UHS™ Structural Tubes | Ismt Mining Tube Tubing Pipe dealers in Saudi Arabia | Distributors of Ismt Mining Tube Tubing Pipes in Iran | Distributors of Ismt Mining Tube Tubing Pipes in Saudi Arabia | Distributors of Ismt Mining Tube Tubing Pipes in Qatar Kuwait | Distributors of Ismt Mining Tube Tubing Pipes in Saudi Arabia | Distributors of Ismt Mining Tube Tubing Pipes in Mumbai India | Ismt Mining Tube Tubing Pipe Dealers in Mumbai India | Dealers of Multi Rifled Tubes in Iran | Dealers of Multi Rifled Tubes in Saudi Arabia | Dealers of Multi Rifled Tubes in Indonesia Russia | Dealers of MS Pipes in Saudi Arabia | Exporters of Multi Rifled Tubes in Mumbai India | Dealers of Powergen Tubes in Chennai | Dealers of Hydraulic Line Pipes in Saudi Arabia | Dealers of Hydraulic Line Pipes in Indonesia Russia | Dealers of Hydraulic Line Pipes in Saudi Arabia | Exporters of Hydraulic Line Pipes in Mumbai India | Dealers of UHS™ Structural Tubes in Chennai | Dealers of Powergen Tubes in Saudi Arabia | Dealers of UHS™ Structural Tubes in Indonesia Russia | Dealers of UHS™ Structural Tubes in Saudi Arabia | Exporters of UHS™ Structural Tubes in Mumbai India

Our Products Range